510N Shell End Mills

In stock

SKU

510N

M2 High Speed Steel                                  Right Hand Cutting                                    BSS 122 part 1 (1953)
Right Hand Spiral Teeth.                             With front recess and rear driving slot         (BSS122 or DIN 138)
Metric sizes also have a keyed bore                                                                                       DIN1880 Type N

Cutters for general-purpose shell end milling in most ferrous and some non-ferrous materials. The fractional
sizes shown below are those of the ‘new’ standard (issued in 1953). Tools to an older standard from 1926,
which are to different dimensions and fit different arbors, can still be made to special order.

Grouped product items
Product Name	Diameter	Length	Bore Size	Recess Diameter	Number Teeth	Qty
510N 1.3/4 Shell End Mill £103.46 - 5 in stock	1,3/4	1,1/4	3/4	15/16	8
510N 2.1/2 Shell End Mill £158.50 - 2 in stock	2,1/2	1,5/8	1	1,3/8	8
510N 3" Shell End Mill £191.52 - 3 in stock	3"	1,3/4	1,1/4	1,13/16	10
510N 3.1/2 Shell End Mill £261.95 - 1 in stock	3,1/2	1,7/8	1,1/4	1,7/8	10
510N 4" Shell End Mill £385.22 - 1 in stock	4"	2,1/4	1,1/2	2,1/4	12
510N 35 x 35 x 16mm Shell End Mill - POA £0.00 - Out of stock	35	35	16	-	-	Out of stock
510N 40 x 32 x 16mm Shell End Mill £105.66 - 5 in stock	40	32	16	23	8
510N 50 x 36 x 22mm Shell End Mill £118.87 - 53 in stock	50	36	22	30	8
510N 100 x 45 x 32mm Shell End Mill £374.22 - 3 in stock	100	45	32	-	-
510N 100 x 50 x 32mm Shell End Mill £374.22 - 1 in stock	100	50	32	45	10
510N 125 x 56 x 40mm Shell End Mill £583.34 - 3 in stock	125	56	40	56	12

Details

* Number of teeth (Z) in cutters may not cover all the current stocks, and cutters with small differences in the number of teeth to those shown above may be supplied.

The following similar tools may be supplied to special order: the quantity ordered determines the unit price:
Shell End Mills with Left Hand Spiral and Left Hand Cutting Teeth
Shell End Mills with Chamfered front corners                      Cutters to customer drawings
Shell End Mills with radiused front corners 
Cutters in cobalt or PM-material
Special geometry cutters optimised for cutting particular materials. These can include the recommendations for light alloys, with high front rakes and coarser 
tooth pitches (DIN1880 Type W) or with closer pitch and reduced cutting rakes for hard, shortchipping materials (DIN1880 Type H)

——————————————
HSS “Face Mills”, which are similar to the above, but with a raised boss and horizontal driving slot (to an even older standard) in the BS series, and to DIN841 in 
the metric series, may still be called for, and can also be produced to special order.